- 2019 new 400w 600w wind
Brand Name: IHXENERGY
Type: Wind Power Generator
Type: Wind Solar Hybrid Charge Controller
Application: hybrid charging for Wind Turbine Generator and Solar Panels
Over-charging Protection: Yes
Over-discharging Protection: Yes
Battery Reverse Protection: Yes
Solar Reverse-charging Protection: Yes
Open-circuit Protection: Yes
Over-wind Protection: Yes
Warranty: 2 Year Free Maintanence
Approved: CE RoHS FCC SGS
- Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used;
- In the high wind speed or the Wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function,protection system of the equipment.
- Solar charging using in series MOS tube technology, which makes the controller power consumption is small, the system more stable.
|Rated voltage||12V/24V Automatic identification system voltage|
|PV input power||400W||500W||500W||600W|
|Wind turbine power||600W||500W||600W||600W|
|Even charge protection||14.4V±1%(12V) / 28.8V±1%(24V)|
|floating Charge||13.8V±1%(12V) / 27.6V±1%(24V)|
|Even charge recover||13.2V±1%(12V) / 26.4V±1%(24V)|
|Temperature Compensation||-24mV/ Degree / -48mV/ Degree|
|Over Discharge||Shut off (DC)||10.8V±1%(12V) / 21.8V±1%(24V)|
|Resume (DC)||12.3V±1%(12V) / 24.6V±1%(24V)|
|Over Voltage||Shut off (DC)||16V±1%(12V) / 32V±1%(24V)|
|Resume (DC)||15V±1%(12V) / 30V±1%(24V)|
|Voltage drop (DC)||≤0.5V|
Step-less Unloading function
Maximum Power Point Tracking------MPPT(Charging Efficiency 30%higherthan original PWM Type)
high wind or the generated power of wind turbine is beyong the scope of the battery and loads absorptions,aim at protect the each equipment of whole system
|Boost charge||Flexible independent step-up circuit (optional)|
|Show parameters||voltage,charge current,battery volumetric|
|Protected type||Lightning protection, solar cells, anti-anti-charge protection, battery open-circuit protection, battery reversal protection, over speed and over-voltage soft automatic brake protection, overload protection.|
|Heat emanation way||radiator|
|Working Temperature||-25 ~+55|
|Height||≤5500m(2000m above the need to reduce power use)|
|Environment humidity||0~90%,No condensation|
|Weight||1. Net Weight: 1.20KG 2. Gross Weight: 2.7 KGS/PC(controller+dump load)|
|Shape dimension||MPPT Wind Solar Hybrid Controller: 162x140x64mm|
|Unloading Resistance: 240x110x63mm|
Unloading Resistance: 240x110x63mm
Button 1: Press this button to enter setup interface or switch setup program;
Button 2: Click this button to switch down on page views, in the setup interface, it is used to reduce the parameter values, step 0.1V;
Button 3: Click this button to switch up browsing on page views, in the setup interface, it is used to increase the parameter values, step 0.1V;
Button 4: Click this button to exit the setup interface, and save the parameters.
LCD Screen (the default interface)
To the user in accordance with the specifications, general automatically entered into the following interface
on behalf of the display Battery Voltage at this time, digital is the Battery Voltage Readings;
represents the current day (if it is night, the icon into);
represent the charging and discharging, for charging, having the current will show effect; when there is no current or current is very small, the label will disappear; For discharge, when the battery is in the state of under-voltage, flashing the overall effect, when the battery is in good state, according to static effect, marking can pick up the load, after loading, if there are current, will display effect.
on behalf of the solar panels, power generation according to the sun;
on behalf of the battery, the number of inside represent the current battery capacity;
on behalf of the load, the load output will be lighting effects under the condition of display;
on behalf of the fan, the wind will come, the animation will be shown.
Parameters to browse
User press down key to view the fan charging current "Ifan", the solar charging current "Ipv", press the up button to return to the interface of a parameter.
The above three pages, collectively known as browse pages, when a minute don't operating controller buttons, LCD back-light will automatically go out, after pressing any key will once again lit back-light and continuously for one minute.
Press Enter key, the controller into the parameter set interface, as the following showss, "Vfloat" represent this time can be set to float charging voltage value, the user can press or key numerical, each time you press the increase or decrease 1V, set up finished, the user can press the ESC key to exit to browse the first page, can also continue to press Enter to switch to the next project, operation method as belows:
The controller can be set to Float charging pressure point "VFloat",under-voltage point "Vunder", over-voltage point"Vover",fan unloading point "Vfan_breaking",the operation method is the same as the first item.
Service promise: this machine is repaired without paying a fee within a year, lifelong maintenance. Exceeding the deadline or being damaged during transporting or artificial damage or natural disasters damage caused by irresistible factors is not in the list of the warranty.
5 Blade wind turbine generator 400W enough power output Max 600w 12V 24V 600W Wind Generator +400W solar Controller
MPPT Wind Solar Hybrid Boost Charge Controller 12V 24V apply for 800W 600W wind turbine generator +600W 400W solar panels
1400W MPPT Wind Solar Hybrid Boost Charge Controller for 12V/24V 800W 600W wind turbine generator +600W 400W solar panels system
MPPT Wind Solar Hybrid Boost Charge Controller 12V/24V auto apply for 800W 600W wind turbine generator +600W 400W solar panels
1400W MPPT Wind Solar Hybrid Booster Charge Controller, 12/24V Auto apply for 800W 600w wind+600W 400W solar with dump load.
Vertical Axis Wind Turbine Generator 12V 24V 400W Generator+1000W Boost MPPT 600w Solar 400w Hybrid Charge Controller
Hot Sale!!! 400W 12V/24V AC 1.4m wheel diameter3blades Wind Turbine Generator with free 1200W Controller 600W Solar
400W Wind Turbine Generator CE Approved low wind start 12V 24V windmill system + 600W waterproof Controller
New design !!! Wind Turbine Generator 400W 12V 24V MAX 600W CE RoHS Approved wind generator fit for Home or Marine Use
600W 12V/24V Auto/Manual Brake Advanced Wind Charger Controller Regulator for wind mill turbine 100W/200W/300W/400W/500W/600W
600W wind generator MAX 830W turbine+1000W MPPT hybrid charge controller for turbine generator+400W solar panels